DIY Explanation

pour améliorer, meaning 'to improve', is a humble record of our renovation, home improvement and landscaping projects, with our travel adventures thrown in.

22 February, 2013

A Leg Up


Please join me in my garage. Never thought someone would say that to you, did you?

You're welcome.


As we're nearing the finish line with the downstairs area, there are of course still a million little things that need to be done in order to actually be able to call it "finished". One of those things is dealing with the large height difference between the inside areas downstairs (see here to find out what caused that), and everywhere else. There's a big step up from the garage...


And an almost identical step up from the front yard, as this old not-yet-painted photo testifies.


So, rather than just accepting the fact that entering the rooms downstairs would inevitably involve a large leap for mankind, we decided that that situation had to be rectified. Our carpenter organised a quote from a company that specialised in stairs, and it came in at something ridiculous like $800 per staircase. For two little pairs of steps! Who pays that?!!! Our entire giant front staircase cost us less than that!


As you may have guessed, I flat out refused to pay that much, so instead my carpenter ordered the materials himself and spent a couple of hours whipping up two mini staircases.

One for the garage step up...


And one for the front door to the lounge. Forgive the taken-from-above angle of this photo. I was too lazy to walk all the way downstairs to shoot it. Actually, if I'm being honest, it wasn't laziness. I was in my pajamas, and wanted to minimise the time I spent in full view of my neighbours, so it was a quick flash and dash.



With the materials and the carpenter's labour cost I think they still cost me a few hundred dollars (fortunately not $1,600!), but that's the price you pay when you don't want to do it yourself, huh?

So once we had our little stairs, the next tidy-up item on the list was trimming out the garages properly, with architrave around the doors, and skirting boards along the floor.


The laundry nook also got its little edges finished...


And then the last unsightly gap that we were left with was the second garage's ceiling.


Because it sits directly beneath our now-opened-up-to-the-elements upstairs verandah, we couldn't just put a plasterboard ceiling up there and be done with it, because when it rains, water can slip through the gaps between the verandah floorboards, and trickle down on top of this garage ceiling. And plasterboard doesn't handle getting wet very well. So, needless to say, the question of what to do with that ceiling generated a lot of debate. I was told that the only option was to waterproof the upstairs verandah and then tile over it.

My response was something along the lines of...

"OVER MY DEAD BODY!!!!"

There was no way I was agreeing to tile the verandah of our lovely timber house, over perfectly good timber floorboards, no less! So I stuck to my guns and insisted that someone come up with a better idea. I'm a hardass, aren't I?

Fortunately my carpenter didn't take that as an invitation to kill me, and instead put his thinking cap on. And he came up with this!

It's Colorbond roof sheets nailed to the underside of the ceiling framing. We figured that if we angled the roof sheeting slightly so that any water would run down towards the door end (i.e. the end where I took this photo from, we could have a little internal gutter on that end to then direct the water outside the house. Mission accomplished!


I keep my verandah floorboards, the downstairs garage ceiling is waterproof, everyone's happy!


So in terms of progress, we're nearly there downstairs! It's just a few little details left, like finishing off the painting in the garages, setting up the little laundry nook in the first garage (a laundry tub might come in handy), fitting out the kitchen appliances, putting up window coverings and security bars inside, and finalising the bathroom by putting handles on our fancy vanity cabinet and putting up a mirror.

But then there's outside. Our front yard of ugliness. No rest for the wicked!

15 February, 2013

Tinny Tales - Part 2

See here for "Tinny Tales - Part 1

Right! So we're up to the stage where we've finally decided that pressed tin panels are the way to go for the back of our kitchen peninsula and splashback, and we've put in our order for the Snowflakes pattern!

Source


Then we hit the snag.

It's out of stock.

And it would probably be a four-week wait before the manufacturer would have another batch ready.

So, we went back to the drawing board and looked at all of the other options again...

Source

But as much as it seems almost inconceivable that we couldn't find another preference amongst all of those patterns, we just kept coming back to our Snowflakes as our clear favourite. So we decided to wait the four weeks. It's not like we didn't have plenty of other things to do to keep us occupied!

And then, at the end of the four weeks, the manufacturer revised their timeframe, and we were looking at them "maybe" being ready within another two months. Sigh.

I will say that Jean, the owner of Heritage Ceilings, was absolutely fantastic during this whole process. She couldn't have been more apologetic, even though it clearly wasn't her fault.

But we weren't willing to be that patient, so we went back to the drawing board again, and very nearly put an order in for the 'Original' pattern instead.

Source

But then my brilliant husband (yes, sometimes he's extremely brilliant) decided to do a bit of a ring-around potential Brisbane-based suppliers to see if they might have some Snowflake in stock. And lo and behold, Restoration Station had exactly five panels in stock. And we needed four! Hallelujah!

Tom got straight in the car and drove over there to snap them up before they could disappear, and we finally had our tin panels!

The mathematicians amongst you (what, my blog isn't that popular with mathematicians?) may be wondering why we would need four 1.8m long panels when we're only covering our kitchen peninsula and a small splashback above our stove.


And that would be because we decided to cover a few more things too!

Like the splashback above our laundry...



And the back of our downstairs kitchen peninsula!



So, we double and triple checked our measurements, and then Tom got to work marking each of the panels...


And then using the grinder to cut each one to the right size.


We had to make a decision as to exactly how high above our stovetop our rangehood would eventually sit before we could cut the tin...


And we popped it in! It looked remarkably small without a rangehood to ground it. One step at a time!


And then the moment we've all been waiting for, the panel on the back of the peninsula went in!


And voila! We have an extremely shiny kitchen now!


That situation is only temporary though, since neither of the panels is actually fixed in place yet (thus the stool stopping the big panel from falling over). I have plans to paint them, since they're pretty full-on in their raw silver colour. Just have to decide what colour!

Then it was the downstairs kitchen's turn! Because of the giant length of that bench, one full panel was not long enough, so we cut an extra piece to size to cover the gap. The panels are designed to overlap each other on certain edges, so the join is hardly noticeable.


But again, the raw silver colour was a bit intense for us!

And I wasn't conflicted about what colour to paint this time. Any guesses?


I wanted a lovely gloss black finish to match the glossy black tile splashback behind the stove. So, I decided to spray paint the panels rather than rolling on the paint, for a completely clear finish. I went through FOUR cans of spray paint! It was a really strange experience. I'd sprayed about four coats of light misty spray (as you're supposed to do), and I'd get some areas where it almost looked like I hadn't sprayed them at all, and others where there were hints of the beautiful black glossy look I was going for. So, I just kept going until I completely ran out of spray paint. I think it's something to do with the way light hits the peaks and valleys of the surface. It makes it really hard to actually be sure about whether you've got good coverage!

It looks pretty good in the end, though!


And then it was time for installation! I was super super excited.


The recommendation is to use small zinc nails that you hammer through the tin into whatever is behind it. We decided to double up and use glue as well, just to be extra safe.


And we discovered that the nails themselves have a bit of trouble penetrating the tin's surface, and added to the fact that we'd used some of the leftover flooring as the board behind it, we really struggled with the nail-hammering part of it.

So, we adapted our system, and I used a small drill bit to pre-drill the tin and a little way into the board behind it so that the nails had a clear run before gripping into the board.


In order to avoid hitting my lovely paint job with the hammer, we would hammer the nails until they were almost in, and then use a nail punch to provide a bit of separation between the nail and hammer for the last couple of hits.

The funny thing about the panel is that it's very ripply! Some areas would sit beautifully flat against the board behind them, and there were others where we had to put a nail in almost every section of the pattern in order to try to iron out the ripples.
What do you think? Beautiful yes?


I then went over all of the nail heads with a little dab of black nail polish once we were done, and you'd never know they were there unless you were really looking for them!


How's that for an instant transformation?



The upstairs kitchen and laundry have to wait a bit longer for their final installation. Stay tuned!

14 February, 2013

Tinny Tales - Part 1

Happy Valentines Day! I realised this morning that this is Tom's and my seventh Valentines Day together! And for the first time, I've told him not to send me flowers. Because really, I'm just not that keen on seeing hundreds of dollars added to our credit bill for the sake of it. Hopefully he finds a simpler, more creative way to show he loves me. Hint hint, honey!

In the meantime, let's get back to this renovation, shall we? Because let's face it, it's the other love of our lives.

Let's move upstairs and have a chat about our kitchen peninsula (otherwise known as a breakfast bar), shall we? Here it is looking from the lounge. And obviously this shot was taken while we still had a back door.

 

A little unfinished, right? That's just the raw backs of the cupboards and the little MDF plinth we built for it. Probably not the best look if we want this renovation to actually look complete, right?

 

Right. Well I've dithered (as always) for a long time over whether I should just stick some ordinary VJ boards on the back there and be done with it, or whether I should try to do something a bit more special and interesting to make a feature of it.

I really wanted to go in the interesting direction, but there's a fine line to tread between interesting and off-putting. I didn't want my choice to prevent prospective buyers in the future from wanting to buy the house.

And then one day, I can't remember now what gave me the idea, I decided to google "pressed metal panels", thinking that that might just be my good safe zone between off-putting and boring. And that is how I stumbled across the Heritage Ceilings website. It has pictures upon pictures of tin panels installed in houses, shops, you name it.

Source
As the name 'Heritage Ceilings' suggests, pressed tin panels have traditionally been used on ceilings.

Source
But as the pictures testify, there are no laws saying you can't be creative.

Source
I found examples upon examples of the panels used on the backs of benches...

Source
And even as kitchen splashbacks!

Source
In fact, in last year's season of the Australian renovation show 'The Block', Dale and Sophie used pressed tin in the 'Original' pattern as their kitchen splashback.

Source
I'm proud to say that I actually came up with the idea before seeing them use it, though. So there!
 

Anyway, the more pictures I looked at, the more convinced I was that I was on the right track.

Source
And the best part? It's not that expensive! Just in case you can't read this price list from Heritage Ceilings, a 1828mm x 915mm panel (more than enough to cover the back of our kitchen peninsula) costs only $95 (plus GST and delivery).

Source
I figured that we could even order a second panel and cut it to fit in the gap between the two windows on either side of the kitchen stove, as a splashback.


But deciding on our interesting-enough material to put on the back of the peninsula was only a third of the battle. The next third?

Deciding on the style.

Because there were a lot of patterns to choose from!


We eventually narrowed it down to 'Snowflakes' and 'The Shield'.


We really liked the larger patterned look of 'The Shield', particularly on a big wall like this.

Source
But because we had a much smaller area to cover, we worried that the larger pattern would be a bit overwhelming. Particularly for the section of splashback above the stove, since just one repeat of the pattern is about 610mm x 610mm, and our splashback would only need to be about 920mm x 700mm, meaning we'd get only one-and-a-bit repeats of the pattern, which could look quite messy.

So, we were down to Snowflake.

Source
Which I loved the look of over a larger area, but which had a small enough repeat that we thought it could give us a nice (but not overly floral like some of the other patterns) textured look.

Source
So the decision was made, and we put in our order!

But the course of true love never did run smoothly, so we inevitably struck a snag. More to come!
Related Posts Plugin for WordPress, Blogger...